Start with the Distribution Role
A switchboard and a panelboard both distribute electrical power, but they typically occupy different positions and serve different loads in a system. A switchboard is commonly used as a larger distribution assembly at a service entrance or downstream distribution point, where it may receive power and feed multiple circuits or other equipment. A panelboard commonly distributes power to branch circuits or smaller groups of loads. These are typical roles, not a substitute for reviewing the one-line diagram, applicable codes, and equipment design. The right choice depends on the system architecture and project requirements—not simply on the building’s size or a product name.
For a new installation or replacement, trace the source, distribution path, and loads first. Determine whether the equipment must serve as service equipment, a feeder distribution point, or a branch-circuit panel, and identify what connects upstream and downstream. Those interfaces clarify which protective devices, metering, and enclosure arrangements may be needed.
Compare Ratings, Not Labels
The word “switchboard” does not mean a particular ampacity, voltage, or fault withstand capability, and “panelboard” does not establish those values either. Confirm the system voltage and phase, continuous load, expected load growth, available fault current, and the ratings required for the specific installation. Verify bus and device ratings, interrupting ratings, and short-circuit withstand or other applicable fault ratings as relevant to the proposed design. These are distinct considerations: a protective device’s interrupting rating is not interchangeable with an assembly’s withstand rating.
Never select equipment from a nominal label or a generic product description alone. The electrical design professional must compare actual marked and documented ratings with the system conditions and applicable requirements. Standards and listing considerations depend on the equipment type and design; UL 891 applies to suitable switchboard assemblies, not automatically to panelboards or every switchgear product.
Use the One-Line and Load Information
Useful selection inputs include an up-to-date one-line diagram, utility or source characteristics, load schedules, motor and other significant load details, and the available fault-current information. Identify feeder quantities and sizes, neutral and grounding requirements, spare or future circuit needs, and any transfer, metering, or control interfaces. Where existing equipment is being replaced, record its configuration and connections, but have qualified professionals verify whether the existing arrangement remains suitable for current loads and code requirements.
These inputs help establish whether the project needs a switchboard, panelboard, both in sequence, or another distribution arrangement. They also guide the number and type of outgoing circuits, protective-device coordination, physical layout, and termination planning. For custom new switchgear, provide the governing drawings and specifications early; unresolved source data or load assumptions can affect design decisions and lead time.
Plan the Physical and Electrical Interfaces
Equipment selection must account for more than the electrical one-line. Confirm available floor or wall space, access and working clearances, cable entry direction, conductor bending and termination space, and the route from source to load. Enclosure type and environmental suitability must be chosen for the actual location and verified against project conditions; do not assume an enclosure is appropriate based only on an indoor or outdoor label. Also coordinate equipment dimensions, mounting, and connections with adjacent gear and the building design.
At the electrical interfaces, define incoming and outgoing conductors, grounding and bonding provisions, neutral treatment, control wiring, and any required metering connections. Confirm who supplies interface details and how drawing revisions will be reviewed. These decisions reduce the risk of mismatched terminations, obstructed access, or a distribution assembly that cannot connect as intended.
Coordinate Protection, Drawings, and Verification
Protection choices should be coordinated with the system study and the loads served. Qualified electrical professionals should evaluate device settings and selectivity, available fault current, and any required arc-flash or coordination analyses under the project’s applicable practices. A switchboard’s or panelboard’s role does not, by itself, establish a safe setting or guarantee coordination with upstream and downstream devices. Relevant authorities and the project team determine applicable code and inspection requirements.
Before release, review approved submittal drawings against the one-line, circuit schedule, ratings, layout, and connection details. Establish what design reviews and factory tests are specified, what documentation will be provided, and how exceptions will be resolved. Testing and inspection scope depends on the equipment and contract; confirm it rather than assuming a particular test, certification, or listing.
Prepare a Clear Request for New Equipment
To request new equipment, send the one-line diagram, load and circuit schedules, source and fault-current data, required ratings, installation conditions, and project schedule. Note whether the scope is a switchboard, panelboard, or coordinated combination, and identify service functions, metering, protective devices, future provisions, and connection constraints. Mark information that is preliminary so design assumptions can be distinguished from confirmed requirements. A specification review by qualified professionals is essential before final selection.
A US manufacturer of new switchgear can review the submitted requirements and develop a custom assembly to specification, with applicable standards and UL 891 suitability evaluated for the actual design. Lead time is project-dependent, and nationwide shipment can be coordinated around the project’s receiving and delivery constraints. A practical next step is to resolve missing system data, agree on drawing review milestones, and confirm ratings and interfaces before approving fabrication.
Project specification checklist
Use this checklist to organize the details for a project-specific review. Final ratings, applicable standards and equipment selections depend on the approved design.
| Item | What to confirm |
|---|---|
| Distribution function | Confirm whether the equipment is service, feeder, or branch-circuit distribution and identify upstream and downstream interfaces. |
| System and fault ratings | Provide voltage, phase, load, available fault current, and required bus, device, interrupting, and assembly ratings for design review. |
| Circuit and protection schedule | Define outgoing circuits, protective-device needs, metering, control features, and any future provisions. |
| Installation conditions | Confirm space, access, cable entry, conductor terminations, environmental conditions, and enclosure requirements. |
| Standards and verification | Identify applicable project standards, listing needs, submittal reviews, inspection, and specified testing; verify suitability for the design. |