Bonding Definition for Switchgear Projects
Bonding is the intentional electrical connection of conductive parts so they have the continuity required by the design. In switchgear, those parts may include an equipment frame, enclosure sections, doors, barriers, or designated grounding conductors. The exact connections depend on the equipment arrangement and applicable design requirements; the word does not mean that every metal part is automatically bonded simply because it touches another part.
This grounding and conductors glossary distinction matters when specifying new switchgear. Bonding establishes conductive paths between selected parts, while grounding connects designated equipment or system points to ground as required by the project. Qualified electrical professionals must determine the intended arrangement from the system design, codes, and project documents. A definition is a starting point, not a substitute for a reviewed grounding and bonding design.
Where Intended Continuity Matters
Switchgear can include multiple joined sections, removable panels, doors, and interfaces with adjacent equipment. Project documents should identify which conductive parts require continuity across those interfaces and how that continuity is to be maintained in the assembled configuration. A mechanical joint may be part of a designed bonding path, but its suitability cannot be assumed from appearance alone; materials, finishes, fastening details, and equipment construction can affect the design.
The intended path also has to fit the installation. Consider how the lineup connects to the facility grounding conductors, whether sections are shipped or installed in stages, and whether adjacent equipment is part of the same design scope. These questions help prevent gaps between the equipment drawings and site work. Confirm interface responsibilities and required connections before fabrication and again during installation planning.
Inputs That Shape Bonding Decisions
Useful inputs include the one-line diagram, grounding design, equipment arrangement, conductor schedules, and specifications identifying the system and installation conditions. Review the equipment type, section layout, conductor entry points, adjacent assemblies, and any project-defined fault-current or protective-device information that affects the design. Do not select a bonding conductor or connection based on a general definition or a presumed standard value; those decisions require qualified engineering review.
Also clarify the applicable codes and standards, the authority having jurisdiction, and the project’s documentation requirements. Applicable requirements vary with equipment type and design. If an assembly is intended to meet a particular listing or standard, confirm that the requirement applies to that assembly and configuration rather than assuming it applies to every switchgear product. Resolve unclear or conflicting requirements before releasing final drawings.
Interfaces and Design Choices to Review
A project review should trace the intended bonding path across equipment boundaries: between lineup sections, from equipment to the specified grounding conductor, and at interfaces with connected assemblies. Identify who supplies each conductor, connector, or field connection, and whether any connections are factory-installed or completed at the site. These scope details should be explicit in the specification and drawings so that procurement and installation teams are working from the same design.
Construction choices may include connection locations, conductor routing, hardware, and provisions for removable components, but no single approach is universal. The design needs to account for the actual equipment, environment, and installation. Confirm that drawings show accessible connection points and that any required field work is clearly described. Do not alter or omit a bonding connection based on convenience; refer proposed changes to the responsible electrical professional.
Coordination, Documentation, and Verification
Coordinate bonding requirements with switchgear drawings, facility grounding plans, cable and conductor schedules, and installation responsibilities. Before approval, check that the specified interfaces and connection points are represented consistently and that the equipment supplier has the project inputs needed to build the intended configuration. For new switchgear, custom assemblies can be designed to specification, but the requirements must be defined and reviewed rather than inferred from a generic product description.
Inspection and testing should follow the project documents and procedures established by qualified personnel. Confirm which connections are subject to visual inspection or continuity verification, who records results, and what acceptance criteria apply. Testing methods and limits depend on the design and applicable requirements; this glossary definition does not establish them. Work on energized equipment is not a safe way to resolve uncertainty. Coordinate verification with the responsible professionals and relevant authorities.
Practical Steps Before Ordering New Switchgear
Before requesting a quotation or approving submittals, provide the grounding design, equipment arrangement, connection requirements, applicable standards, and site interface details. Ask the manufacturer to identify assumptions, exclusions, and any information still needed to confirm the bonding configuration. Check that section-to-section connections and the interface to the facility grounding system are addressed, and ensure field-installed items are assigned to a responsible party.
For a US-built new switchgear assembly, discuss the project-specific drawings and applicable product requirements with the manufacturer; do not assume a listing or standard applies without confirmation. Lead time depends on the project and the completeness of its requirements. A practical next step is to have the electrical engineer, procurement team, and equipment supplier review the same documents before release. That review helps align intended continuity, scope, and verification without substituting a glossary term for engineering judgment.
Project specification checklist
Use this checklist to organize the details for a project-specific review. Final ratings, applicable standards and equipment selections depend on the approved design.
| Item | What to confirm |
|---|---|
| Conductive parts and interfaces | Identify which enclosures, sections, doors, barriers, and adjacent assemblies require an intentional continuity path. |
| Grounding design inputs | Provide the reviewed grounding plan, one-line diagram, equipment arrangement, and relevant conductor schedules. |
| Connection scope | Confirm which bonding conductors, connectors, and field connections are supplied or completed by each party. |
| Applicable requirements | Verify applicable codes, standards, and any listing requirements for the specific equipment and configuration. |
| Verification and records | Establish project-specific inspection or continuity verification procedures, acceptance criteria, and documentation responsibility. |