Plan the Cable Route Before Choosing Entry

Top and bottom cable entry describes where conductors approach and enter a switchgear assembly. The choice affects the equipment layout, cable bending space, termination access and coordination with the building or site routing. For a new installation, identify whether feeders arrive from overhead tray or conduit, below a floor, through a trench, or by another defined route. Then compare that path with the proposed lineup location and the direction of each circuit. A nominal entry preference is not enough: cable type, conductor size, quantity, termination arrangement and installation method all affect the space required. Review these inputs with the equipment design team and qualified electrical professionals before the enclosure and compartment arrangement are finalized.

Check Working and Bending Space

Conductors need room to enter, turn and reach their intended terminals without creating an impractical installation or obstructing access. Required space depends on the conductor construction and size, termination hardware, bend limits, routing method and the specific equipment design. Top entry may require overhead clearance for routing and cable handling; bottom entry may depend on floor openings, trench dimensions and below-grade access. Either arrangement can also affect access to adjacent equipment or building services. Provide dimensioned plans and sections showing the lineup, obstructions, cable approach, openings and available clearance. Have the proposed layout reviewed against applicable project requirements and the equipment manufacturer's design information; do not assume a generic clearance or enclosure arrangement will suit every installation.

Coordinate Grounding and Electrical Interfaces

Cable entry must be coordinated with grounding and other electrical interfaces, not treated as an isolated opening in the enclosure. Establish how equipment grounding conductors, bonding connections, cable shields or other specified grounding elements are routed and terminated for the particular system. Identify incoming and outgoing circuits, neutral requirements where applicable, termination locations, and any control or auxiliary wiring that shares the route. Confirm interface details with the one-line diagram, grounding documents, cable schedule and equipment drawings. The design should make clear which connections are within the assembly and which are external project interfaces. Applicable electrical standards and grounding requirements depend on the design and project. Qualified professionals should resolve those requirements before release for manufacture.

Choose an Entry Arrangement for the Site

Top, bottom or a coordinated combination of entries may be considered when the site has different routing conditions for incoming and outgoing circuits. The choice should reflect actual pathways, installation sequence and future access needs, while preserving the equipment's intended compartment arrangement and service access. Confirm whether conduits, busway, trays, trenches or floor penetrations are part of the project, and identify who provides and coordinates each interface. Check for conflicts with structural members, other services and the planned equipment footprint using current drawings rather than assumptions. The manufacturer can evaluate custom assembly details to specification, subject to design review. No entry arrangement, opening size or equipment configuration should be considered acceptable until it is verified for the specific application.

Review Drawings, Interfaces and Verification

Before equipment release, review the layout and connection drawings for entry locations, conductor destinations, grounding details, openings, clearances and any separation requirements defined by the project. Reconcile drawing information with the latest cable schedule and site routing plans; late changes to circuit count, conductor selection or approach direction can affect enclosure design and installation. Agree on the information needed for design review, how interface questions will be resolved, and which project checks or tests apply to the supplied assembly. Testing and applicable standards depend on equipment type and design; UL 891 applies to suitable switchboard assemblies, not automatically to all switchgear. Confirm any required listing or compliance criteria for the actual equipment rather than inferring them from an entry choice.

Prepare a Complete Procurement Package

For a useful quotation and design review, provide the equipment type and system documents, one-line diagram, circuit and cable schedules, proposed lineup dimensions, entry preference by circuit, routing drawings, grounding requirements and known site constraints. Include the requested voltage and other project ratings for evaluation, without treating any rating as a standard capability. State whether top entry, bottom entry or mixed routing is required, and identify unresolved dimensions or interfaces that need coordination. Ask the manufacturer to confirm the proposed design against those inputs, applicable project requirements and the requested standards. New switchgear is built to the reviewed specification; custom details, UL 891 applicability where relevant, and lead time are project-dependent. Resolve open items before approval to reduce design and installation uncertainty.

Project specification checklist

Use this checklist to organize the details for a project-specific review. Final ratings, applicable standards and equipment selections depend on the approved design.

ItemWhat to confirm
Cable approachConfirm top, bottom or mixed entry by circuit, with routing drawings and approach direction.
Conductor and termination dataProvide cable type, size, quantity, termination details and applicable bending constraints for design review.
Available spaceDocument overhead or below-floor access, lineup clearances, openings and nearby obstructions.
Grounding interfacesDefine grounding conductors, bonding, shields and termination responsibilities for the project.
Design and compliance basisIdentify equipment type, project ratings and required standards or listing; verify applicability for the assembly.