Start with the 35 kV system context

A 35 kV inquiry needs more context than a nominal voltage. Confirm whether 35 kV describes the system’s nominal operating voltage, the equipment class sought, or both. The maximum system voltage and the applicable equipment voltage class are related but are not interchangeable; selection must follow the project’s electrical design and governing requirements. Identify the system frequency, grounding method, operating configuration, and whether the installation is utility, industrial, generation, or another application. These inputs establish the conditions the equipment must accommodate and help prevent a mismatch between switchgear and the connected system.

For a new switchgear package, provide a one-line diagram and the project’s written electrical specifications when available. Include the service point, normal and alternate sources, transformer details, and any planned tie or sectionalizing arrangement. State whether the design is for indoor or outdoor installation, but do not assume that a particular enclosure or construction is suitable until environmental and installation conditions are reviewed. A qualified electrical professional should reconcile the requested equipment class with the system study and the authority having jurisdiction.

Separate nominal voltage from equipment class

Voltage selection should be checked against the complete operating envelope, not just the number in the project title. Ask the engineer to identify nominal and maximum system voltage, expected voltage variation, frequency, and the equipment class required by the applicable design criteria. The equipment’s rated voltage and insulation levels must be suitable for those conditions. A 35 kV label by itself does not establish a complete rating or demonstrate that a proposed assembly is appropriate for a particular system.

Clarify how the switchgear will connect to upstream and downstream equipment, including transformers, cables, bus transitions, and any metering or protection interfaces. Cable termination arrangements and clearances can affect the layout and should be coordinated with the cable type and installation plan. If the project includes future feeders, spare positions, or a planned expansion, identify those needs before the arrangement is developed. The final selection depends on documented project requirements and engineering review; do not infer suitability from a voltage designation alone.

Define insulation and environmental conditions

Insulation requirements depend on the selected equipment class and the system conditions, including expected overvoltage exposure and grounding. The project team should identify the insulation level specified by its design basis and any required coordination with surge protection. Confirm whether the design calls for particular insulating materials, clearances, or phase-to-ground and phase-to-phase arrangements. These choices must be evaluated as part of the equipment design rather than treated as interchangeable options based on voltage alone.

Document the installation environment as well as electrical requirements. Relevant inputs can include indoor or outdoor location, ambient temperature range, altitude, humidity, contamination, seismic criteria, and space or access constraints when applicable to the project. State any restrictions on footprint, cable entry, maintenance access, or adjacent equipment. These conditions may influence construction and enclosure decisions, but no enclosure type or environmental capability should be presumed. The manufacturer and project engineers should review the site criteria and applicable standards for the specific assembly before a design is finalized.

Specify switching and fault duty

A useful inquiry states the continuous-current requirements for each bus and feeder and the expected load profile, including motor, transformer, or other significant loads where relevant. Also provide the available fault-current study, required interrupting duty, and the duration or withstand criteria established by the project engineer. Short-circuit capability is not implied by a 35 kV designation; it must be selected and verified for the actual system and protective-device arrangement. Include the proposed breaker or switching function for each position and distinguish normal operating duty from any required switching or protection duty.

Protection and coordination inputs should include relay functions, instrument transformer requirements, trip and close control needs, and the intended interface with the project’s control system. Share the coordination study or the information needed to complete it, including upstream and downstream protective devices. Confirm whether operating procedures call for interlocking, remote indication, or other control features. Applicable standards and testing depend on the equipment design and project requirements; the specifications should identify the required basis rather than presume a listing or standard applies to every assembly.

Coordinate interfaces and verification

Before design release, align the switchgear lineup with the one-line diagram, equipment schedule, cable plan, and civil or architectural constraints. Confirm feeder count, bus arrangement, incoming and outgoing connection directions, cable termination locations, grounding provisions, control power, and metering interfaces. Identify who supplies interface components and which party is responsible for confirming compatibility with transformers, relays, cables, and the site control system. Resolve any required future spaces or tie points early, since they can affect lineup dimensions and connection details.

Establish the submittal and verification expectations with the project team. The review should cover ratings, drawings, bills of material, protection and control interfaces, and the applicable inspection or test documentation for the specified assembly. Factory testing and acceptance criteria should be defined in the procurement documents, with responsibilities and witness requirements agreed before production. Qualified electrical professionals should review the design, and applicable authorities should be consulted as required. No test scope, certification, or standard applicability should be assumed without confirmation for the exact equipment configuration.

Prepare a complete 35 kV procurement package

To move an inquiry toward a reviewable proposal, submit the project location for shipping coordination, required delivery window, requested quantity, one-line diagram, equipment specification, and current system studies. Add the equipment schedule, layout constraints, cable and control interfaces, and any draft protection requirements. Identify open design decisions separately from fixed requirements so they can be resolved efficiently. For a Central Texas project or a project elsewhere, confirm receiving access, unloading responsibility, and site sequencing with the project team; shipment can be nationwide, but timing and logistics depend on the order and destination.

New switchgear can be custom assembled to project specifications, and assemblies may be built in the USA with all-American components. UL 891 applies to suitable switchboard assemblies, not automatically to 35 kV switchgear; the applicable design standards and verification must be established for the specific product. Lead time is project-dependent, so request a schedule after the scope and submittal requirements are understood. The practical next step is to have the responsible engineer confirm the voltage class, insulation basis, duty, interfaces, and governing requirements before the equipment configuration is approved.

Project specification checklist

Use this checklist to organize the details for a project-specific review. Final ratings, applicable standards and equipment selections depend on the approved design.

ItemWhat to confirm
System voltage and classConfirm nominal and maximum system voltage, frequency, grounding method, and required equipment class.
Insulation basisSpecify project-required insulation levels and coordination with grounding and surge protection.
Continuous and fault dutyProvide bus and feeder load requirements, available fault-current study, and required switching or withstand duty.
Installation conditionsDocument indoor or outdoor location, environmental criteria, access, footprint, and cable-entry constraints.
Protection and interfacesIdentify breaker functions, relay and instrument transformer needs, control power, communications, and connected equipment.
Compliance and testingConfirm applicable standards, required submittals, inspections, and factory or acceptance testing for the specific assembly.